Najpierw zostaje ugięty układ jednomasowy z luzem i dwiema sprężynami. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Przykład obliczeniowy opisuje stacjonarny przepływ wokół wieżowca w postaci bloków miejskich (model w skali). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
Poniższy przykład obliczeniowy jest oparty na przykładzie obliczeniowym 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Rozważmy sztywną rurę rusztowania, zamocowaną u dołu za pomocą podpory węzłowej rusztowania i obciążoną zarówno momentem, jak i siłą. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
A sphere is subjected to a uniform flow of viscous fluid. The velocity of the fluid is considered at infinity. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
Przykład obliczeniowy opisuje obciążenia wiatrem działające na model grupy budynków w kilku kierunkach. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
Układ jednomasowy z kotłem typu 'dashpot' jest poddawany stałemu obciążeniu. Determine the deflection and velocity of the dashpot endpoint in the given test time.
Określ maksymalne ugięcie bloku trójwymiarowego zamocowanego na obu końcach. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.
Drewniana belka wzmocniona dwiema stalowymi płytami na końcach jest obciążona ściskaniem. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Cztery słupy są zamocowane na dole, a od góry połączone sztywnym blokiem. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
W przykładzie obliczeniowym porównano obliczenia obciążenia wiatrem budynku z płaskim dachem zgodnie z normą EN 1991-1-4 z wykorzystaniem symulacji CFD w RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
W przykładzie obliczeniowym porównano obliczenia obciążenia wiatrem budynku z dachem dwuspadowym, przeprowadzone zgodnie z normą EN 1991-1-4, z wykorzystaniem symulacji CFD w RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Ten przykład weryfikacyjny porównuje obliczenia obciążenia wiatrem budynku z dachem dwuspadowym, z wykorzystaniem normy ASCE 7-16, z symulacją CFD w RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Ten przykład weryfikacyjny porównuje obliczenia obciążenia wiatrem budynku z dachem płaskim, przeprowadzone w normie ASCE 7-16, z wykorzystaniem symulacji CFD w RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Przykład obliczeniowy opisuje stacjonarny przepływ wokół izolowanego budynku (model w skali). The chosen results (velocity magnitude) are compared with the measured values.
Przykład obliczeniowy opisuje obciążenia od ściskania ścian budynków w układzie tandem, zlokalizowanych w poziomie terenu. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Drewniana belka wzmocniona dwiema stalowymi płytami na końcach jest obciążona ściskaniem. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Dwukondygnacyjna, jednonawowa konstrukcja szkieletowa jest poddawana obciążeniu sejsmicznemu. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
Na obu końcach zamocowany jest trójwymiarowy blok wykonany z materiału sprężysto-plastycznego, który jest utwardzany. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Należy określić maksymalne ugięcie czterech słupów zamocowanych u dołu i połączonych sztywnym blokiem u góry. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.